Heater Chiller Circulator is a temperature control device that integrates refrigeration and heating. It is a dual-purpose temperature control device that is carefully manufactured and continuously innovated by our company. The temperature control range is -45℃～+250℃. Our company The Heater Chiller Circulator produced is widely used in high and low temperature reliability tests, such as electronic and electrical engineering, automobile motorcycles, aerospace, rubber, plastic, metal, ship weapons, colleges and universities, scientific research units, chemical medicine, new materials and other related product parts Components and materials are developed and tested for various performance indicators under high and low temperature conditions. Heater Chiller Circulator has won the favor of customers for a long time.

Heater Chiller Circulator can provide explosion-proof customized service according to customer requirements. The components of the equipment are all international brands. The compressor is mainly controlled by a professional PLC touch screen and a dedicated single-chip microcomputer in the industry. High configuration, high cost performance, relatively low failure rate, isolated control box is used to protect electrical parts from corrosion, choose full metal frame or stainless steel sheet metal to prolong service life, and adopt streamlined and beautiful design to ensure long-term stable cooling and heating operation of the product.

Heater Chiller Circulator includes oil pipe, oil supply pipeline, cooling device, heating device, pump and cooling water system, heating device and cooling device, cooling device assembly, and oil pipe connection. The cooling water system communicates with the heating device, the cooling device pipe, the pump and the return pipe, the heating device and the cooling device conduit.

Heater Chiller Circulator adopts PLC touch screen control system, which can display the flow chart of the heating system, which is used to display and adjust the temperature and time of the equipment. Display the main process and curves of the device, operating status (including all valves of each valve body open), help menu, fault information display, current phase sensitivity, remote control, etc., convenient for setting and operation.

Heater Chiller Circulator can effectively control the mold temperature. The temperature control system consists of three parts: mold, mold temperature and thermal fluid. Inside the mold, the surface area of ​​the cooling channel must be large enough, and the runner should match the capacity (pump pressure). The temperature distribution in the cavity has a great influence on the deformation pressure of the part. Reasonable setting of cooling channels can reduce internal pressure, thereby improving the quality of injection molded parts. Cycle time and product cost are also reduced.

The commonly used media for Heater Chiller Circulator are heat transfer oil, water, ethylene glycol, etc. According to different temperatures, choose different heat transfer media. The Heater Chiller Circulator can transfer the heat generated by the supporting equipment to achieve the purpose of cooling. The heat transfer fluid must have good thermal conductivity, and a large amount of heat must be introduced or exported in a short time. From a thermodynamic point of view, water is significantly higher than oil.

The Heater Chiller Circulator can provide a temperature-controlled environment with uniform temperature. It can be used as a heat source or a cold source for direct heating or cooling, or as an auxiliary heating or cooling. Widely used in petroleum, chemical industry, electronic equipment, physics, chemistry, bioengineering, medicine and health, light industry and food industry, physical performance testing and chemical analysis research departments, enterprise quality inspection and production departments.