-105 ~ +125°CTemperature Range

550m³/hCirculating Air Flow

7 ~ 9.5kWPower

±0.2℃Accuracy

7 / 10 inchColor Touch Screen

CUSTOM DESIGN

Leave a Message

Email Us

WhatsApp

Features of Recirculating Air Temperature Control System

• It is widely used in high and low temperature testing of semiconductor equipment. Cold and heat sources for high temperature and low temperature constant temperature test of electronic equipment;
• Independent refrigeration cycle fan unit;
• It can work continuously for a long time and defrost automatically. The defrosting process does not affect the storage temperature;
• Modular design, easy replacement of standby unit (if there are 10 units, only one standby unit can be used);
• Solve the problem of frequent door opening and closing and frosting of evaporation system; The defrosting process of the evaporation system has no influence.
• It is simple to build a set of high and low temperature constant temperature chamber transformer (according to the drawings provided, the box shall be spliced like building blocks, the electricity and water shall be connected, and the work can be started after the temperature is set).

Advantages of Recirculating Air Temperature Control System

Working Principle

It is used to cool the gas (non corrosive) or recover it as non corrosive gas by condensation and liquefaction.

Display Function

1. Display all the kind of process control temperatures.
2. Shows indication for refrigeration system working.
3. Shows indication for heater working.
4. Shows indication for circulation pump working.
5. Display the temperature control.
6. The temperature upper limit, lower limit control can be set.
7. Shows the alarm to add the liquid when it is empty.
8. The refrigeration compressor can be set to operate manually or automatically.

Typical Applications

It is used to cool the gas (without corrosion): normal temperature gases such as dry compressed air, nitrogen and argon are introduced into LQ series equipment, and the gas can reach the target low temperature and be supplied to the components or heat exchangers for demand test.

Used for automotive sensors, vehicle control products, electronic control units or ECUs, incoming parts inspection, semiconductor IC verification, simuation-based tesing, cooling heating stress full cycle, desgin or fabrication weakness, fast hot&cold thermal cycling, electronic and mechanical subsystems, core module chip test, auxiliary module chip test, MCU chip test, microcontroller Unit chip test.

Products Parameters

Noted: Can provide customized services all types of equipment. Please consult us for details.