Good working conditions can only be achieved when the refrigeration and heating temperature control device is installed and debugged correctly, so let me talk about what should be paid attention to when installing the refrigeration and heating temperature control device for chemical reactors?

1. First, the cooling and heating temperature control device is located on the surrounding walls or the equipment is separated by a space of more than 50cm, which is convenient for subsequent maintenance.
2. In order to ensure that the function and performance of the device can be stably exerted during use, we should install the device in a place with room temperature and low relative humidity. If the installation site does not have this condition, then you can install an air conditioner or exhaust fan Achieve their goals.
3. The place where the cooling and heating temperature control device cannot be installed with a high temperature heat source, and the nearby temperature should not have a sharp temperature change.
4. Before installing the cooling and heating temperature control device, be sure to use a spirit level to determine whether the ground is level.
5. Make sure that the test equipment is installed in a place without direct sunlight.
6. Before installation, make sure that the ventilation of the place is good.
7. It can be installed in places close to the power supply. Install the cooling and heating temperature control device as close to the power source as possible.

The installation of the refrigeration and heating temperature control device of the chemical reaction kettle is an important step for the user. If the equipment is not installed properly, it will bring inevitable trouble to the subsequent experiments.