What should I do if the 200 ton chiller is powered on and doesn’t work?
What should I do if the 200 ton chiller is powered on and doesn’t work?
1、 Troubleshooting power and fuse issues
When the 200t water chiller suddenly stops, first check whether the power supply works normally. If the power supply fails, plug and unplug the power cord again or replace the power switch. Secondly, check if the fuse is damaged, and if it is damaged, it needs to be replaced.
2、 Check capacitance and circuit board
If there are no issues with the power supply and fuse, it is necessary to check the capacitor and circuit board. The capacitor is an important component of the circuit of the 200 ton chiller. If the capacitor is damaged, it may cause a sudden shutdown of the 200 ton chiller. At this point, it is necessary to replace the capacitor and restart the chiller.
The circuit board is one of the core components of the 200 ton chiller, and any malfunction can also cause the 200 ton chiller to stop working. If you do not have technical repair capabilities, it is recommended to seek professional assistance for repairs.
3、 Replace faulty components
After eliminating the above faults, if the 200 ton chiller still cannot work properly, it may be due to a component malfunction. Such as temperature controller, motor failure, etc. It is recommended to determine the cause of the fault by checking the fault code and choose to replace the faulty component.
4、 Seeking professional repair
If you do not have the technical maintenance ability, and the above measures have not solved the Halting problem problem of the 200t chiller, it is recommended to seek professional personnel for maintenance.
Related recommendations
How does the Cascade Refrigeration Cycle System Realize Low Temperature Control?
699How does the Cascade Refrigeration Cycle System Realize Low Temperature Control? A cascade refrigeration cycle system is used for low temperature control below -20°C. Reasons for achieving l...
View detailsWhat is the reason why the water pump of the 500 ton chiller cannot come out after installation?
545What is the reason why the water pump of the 500 ton chiller cannot come out after installation? 1. The speed of the water pump is too low The equipment failure of the water pump...
View detailsliquid cooled chiller
3Liquid-Cooled Chillers: High-Performance Cooling for Industrial Applications Introduction Liquid-cooled chillers are increasingly becoming the cooling solution of choice in various industrie...
View detailswater cooled chiller cycle
22Water Chiller AC Units: Cooling Solutions for Diverse Applications Water chiller AC units are essential in maintaining comfortable temperatures in commercial buildings, industrial processes, an...
View details
HelloPlease log in