How to deal with the cold water chiller compressor not running?

　　How to deal with the cold water chiller compressor not running?

　　1、 Electrical fault

　　Starting the compressor of the cold water cooler requires the support of electrical signals. If the electrical accessories fail or the wiring is poor, it will cause the compressor to fail to start. At this time, it is necessary to check whether the power input is normal, whether the electrical components are damaged or whether the wiring is correct. If a malfunction is found, it needs to be replaced or repaired in a timely manner.

　　2、 Pressure sensor failure

　　The pressure sensor of the cold water cooler is mainly used to detect the pressure status of the compressor. If the sensor is damaged or fails, it will cause the compressor to fail to start. At this point, it is necessary to check whether the sensor is clean and in good contact. If the problem cannot be solved, the sensor needs to be replaced.

　　3、 Overload protector disconnected

　　The overload protector of the cold water cooler is a safety protection device. If the compressor is overloaded or the temperature is too high, the overload protector will automatically disconnect the power supply, thereby protecting the compressor from damage. However, if the protector is damaged or too sensitive, it can also cause the compressor to fail to start. At this point, it is necessary to check the status of the protector. If any abnormalities are found, the overload protector needs to be replaced.

　　In summary, the reasons for the cold water cooler compressor not starting may be multifaceted and require targeted inspection and maintenance. If the user does not have relevant experience, it is recommended to invite professional personnel for inspection and maintenance to avoid unnecessary losses.