Water-cooled screw chillers are refrigeration equipment that must be used in the production process of many enterprises. However, when we purchase this equipment, we will find that its price varies from high to low, and even the price of the same type of equipment varies greatly. What details affect the price of this equipment? Let’s analyze it below.

1. The price of the equipment will affect the compressor

The compressor is the core component of the equipment and can be said to be indispensable, so its importance can be seen. At present, different manufacturers use different compressor brands. Some manufacturers use imported compressors, and some manufacturers use domestic compressors. Different compressor brands have different quality and price.

If the manufacturer chooses high-quality imported brands, the overall price of its equipment will be much more expensive than that of equipment using domestic compressors.

When users choose equipment, they may wish to ask about the compressors used by the manufacturer, and try to choose high-performance compressors.

2. The price of the equipment is affected by the evaporator

The evaporators used by most manufacturers are shell-and-tube evaporators. These evaporators generally use high-quality external threaded copper tubes, high-strength sealing structures, and strong heat transfer capabilities. Of course, when it is produced, the main material copper tube used is good or bad, which leads to price deviations.

The evaporators and condensers used by some equipment manufacturers are independently produced, so there will be certain advantages in terms of price.

In addition, due to the different needs and requirements of users, some users require the use of titanium tube evaporators, because the materials used in titanium tube evaporators and shell-and-tube evaporators are completely different, so the prices are also different.

When installing the unit, you need to pay attention to the following points:

1. Before installation, it is necessary to carefully check the appearance of the equipment, and check whether the internal components are complete and whether there is any damage. If there is a problem, the manufacturer should be contacted.
2. Install on floor and mounting pad. The installation ground should be flat and able to bear the weight of the entire device. Once the equipment tilts or collapses, it is easy to cause equipment failure and damage.
3. The equipment should be placed in a workshop with a room temperature of 4-40 degrees, and a certain amount of space should be left around to facilitate heat dissipation and maintenance of the equipment.

The price of water-cooled screw chiller is often affected by the evaporator and condenser. If high-quality accessories are used, the equipment will be expensive, otherwise, the price will be cheap.