The glass reactor cold and heat cycle device is widely used in industrial production and plays a very important role. Especially in the chemical industry, many chemical changes in the chemical process are carried out by the reactor, which is the chemical industry. main production.

1. The cold and heat cycle device of the glass reactor adopts 380v power supply. If the voltage fluctuation range is large, it may cause the equipment not to start, the main control board and the compressor to burn out, and the compressor to work abnormally. At this time, it is necessary to install an automatic voltage regulator that matches the equipment before it can be used.
2. Do not damage the power cord, and do not unplug the device by pulling the power cord. Be sure to hold the plug firmly and pull it straight out of the socket. In addition, do not let the box press the power cord or step on the power cord. If you are moving the device away from the wall, do not roll or damage the power cord.
3. When the power cord is damaged, the power cord is damaged or the plug is worn, do not continue to use it. It should be replaced by the relevant electrician according to the power supply requirements of the equipment label.
4. Before cleaning and maintenance and when replacing damaged wearing parts, the power plug of the equipment should be unplugged to avoid electric shock accidents during maintenance.
5. Wide temperature control range; pre-cooling system, refrigeration system and heating system can be used in combination.
6. Rapid heating or cooling; the cooling rate is large, and rapid cooling can be forced.

The chemical reaction process is often accompanied by exothermic and endothermic reactions, and it is often necessary to heat the heat-conducting oil heater to promote the chemical reaction. Heat dissipation is required. Therefore, the reactor is generally equipped with a heating or cooling device to heat or cool the reaction materials in the reactor, so as to maintain better process conditions and achieve better reaction results.