LNEYA Chiller
How to do the Antifreeze Protection of the Chiller?
- When the new equipment is used for the first time, carefully observe whether the water outlet and return pipes are frozen. If there is ice or near ice, warm water should be added to the water tank, or antifreeze should be added to the water tank to prevent the water from freezing.
- When the unit is not in use for a long time, the drain valve should be opened to drain the water in the water tank. At the same time, the drain nut under the water pump should be unscrewed to drain the remaining water in the water pump to prevent the water system from being caused by low temperature. Icing, shell-and-tube and fin-type evaporators burst and cause refrigerant leakage or damage to the pump impeller.
- Before the new equipment is transported, the water must be completely drained to ensure that there is no residual water in the water pump and water tank system pipeline to prevent the water system pipeline from expanding and breaking due to low temperature freezing during transportation.
- In order to prolong the service life of the equipment and ensure the cooling effect, please clean the shell-and-tube and fin-type condensers regularly, and change the water and filter elements frequently to ensure the water quality is clean.
- The ice water pipe of the chiller must be insulated, because the pipe insulation can not only prevent the serious loss of cooling capacity, but also prevent the condensation water formed on the outer wall of the pipe.
- Use antifreeze as coolant, because antifreeze is generally composed of alcohols and water, and requires high boiling point and flash point, high specific heat and conductivity, low low temperature viscosity, not easy to foam, and does not corrode metal parts and rubber hoses Wait. When selecting or preparing antifreeze, its freezing point should be 5°C lower than the lower temperature of the operating environment.
Latest News
water chiller efficiency
129Introduction to Water Chiller Efficiency Water chillers are vital refrigeration systems that cool water (or water-glycol mixtures) for air conditioning, industrial processes (e.g., manufacturing, data center cooling), and equipment temperatur…
chiller rate
145Introduction to Chiller Rate Chiller rate is a collective term describing the performance metrics that quantify a chiller’s ability to remove heat (cooling capacity) and its efficiency in doing so. Chillers are refrigeration systems that cool…
closed cycle cryocooler
200Introduction to Closed Cycle Cryocoolers Closed cycle cryocoolers (CCCs) are specialized thermal management systems engineered to generate and sustain temperatures far below ambient, typically ranging from 0.1 K to 120 K (-273.05 °C to -153.1…
water cooled chiller types
204Working PrincipleReciprocating water cooled chillers use reciprocating compressors. These compressors operate through the back – and – forth motion of a piston within a cylinder. The refrigerant is drawn into the cylinder during the intake strok…
loading…
已经是到最后一篇内容了！
